01942 670 119

Ecombi SSH – Digital Smart Storage Heater

Ecombi SSH – Digital Smart Storage Heater

Using Elnurs Leading Technology Ecombi SSH Smart Storage Heaters give modern efficient storage heating that accurately controls electricity consumption and optimises heat management with high-sensitivity thermostatic controls, adapting daily to your heating needs whatever the weather conditions. Complete with a 5 Year warranty.

  • Intuitive LCD display with advanced control options
  • Temperature sensor with calibration option
  • Open window detection for reduced energy waste
  • 5 Year Warranty
  • Enquire now

    Technical features

    • Digital Smart Storage Heater
    • 5 Year Warranty
    • IEM technology, the intelligent way to manage the charge and the discharge
    • Weekly and daily programming
    • Three levels of temperature: Comfort, Economy and Frost-protection
    • Internet controllable
    • Wireless control and operation with the G Control System
    • Open window detection for reduced energy waste
    • Adaptive start control
    • High quality insulation materials with low thermal conductivity
    • High quality insulation materials in all sides of the storage heater
    • Temperature sensor with calibration option
    • Balancing heating element made of Aluminium
    • Safety thermostat with manual reset
    • Class I insulation
    • Storage heating elements made of stainless steel
    • Front, side and rear air isolating chambers
    • Steel structure powder coated in epoxy RAL 9010
    • Robust thermoplastic fittings
    • Easy to install on any kind of wall
    • Intuitive LCD display with advance control options
    • Compatible with two-period Off peak electric tariff in a single 24hr interval
    • G Control Hub switchboard available as accessory for the wireless control and operation of the storage heater

    Dimensions and Specifications

      MODELECOSSH158ECOSSH208ECOSSH308ECOSSH408
      Storage Heater Input**975w1300w1950w2600w
      Balancing Element Output**450w600w900w1200w
      Charging 7 HRS KWh7.49.914.919.8
      Length cm556689111
      Depth cm19.519.519.519.5
      Height cm73737373
      Total weight kg5977112147
      No. of bricks 6kg 11016*4 (11kg 11072)81216

    FAQs

    • Display in not coming on?Untitled-1
      This can be caused by a few different things. The first things to check would be one of the 3 isolator switches. The Economy 7 and 24hr supply switches and then the switch on the back of the heater. If this does not work we would then recommend checking the fuse board to see if the breakers are all still on. If this does not solve the issue we would suggest calling an electrician to check the fuses in the spurs to ensure power is going to the heater. If power is going to the heater but still no display you will need to call us on 01942 670119 or email technical@elnur.co.uk
    • Storage heater is only lukewarm?Untitled-1
      This would suggest your SSH storage heater is reducing its own charge percentage to reduce running costs. This is a normal process for the smart heater, it will work out the most efficient way to run following your set program and temperature. If you are not comfortable with the current heat output then we would suggest increasing the set point temperature to allow a bigger charge. How to set Temperatures on your ECOSSH?
    • Storage heater is only lukewarm?Untitled-1
      The ECOHHR range is a high heat retention storage heater, this means the storage heater has thicker insulation and the casing won't feel as hot as your older standard storage heater did. Even though the casing is lukewarm the heater will still contain a lot of heat inside, ready for when you want to release. This type of heater is designed to maintain the set temperature throughout the day and is designed not to waste energy, this means every day the heater will measure how much heat is needed and will adjust itself as needed.
    • Are Elnur storage heaters supplied with cable?Untitled-1
      Our Storage heaters do not come with cable. They do not come with cable as the distance from a fused spurs varies too much to supply a set length. The qualified electrician would usually supply the cable needed to wire in your storage heater.
    • Do I need to leave a gap above my heater?Untitled-1
      Yes, a 15cm gap needs to be left above any Electric radiator, Storage heater and Panel heaters. This is to help the convection of the radiator and prevent over heating. Unlike central heating radiators, electric radiators, storage heaters and panel heaters can not be covered as it poses a serious fire risk.
    • What is the difference between manual and automatic storage heaters?Untitled-1
      Storage Heaters Charge up over night using the 7 hrs of economy 7. Manual Storage Heaters charge for the full 7 hours regardless of how much heat it used the previous day. Automatic Storage Heaters calculate how much heat was used the previous day and work out how long they need to charge for. For example, If an automatic storage heater only used 5 out of the 7 hours of stored heat, when it comes to the next charging time the storage heater will wait 2 hours then will charge till it is full. On Average this facility can save you up to 15%.
    • Are these heaters a direct replacement for my current heater?Untitled-1
      Not exactly no. Modern storage heaters do differ to the older traditional storage heater. Most noticeably due to the fact that they now require a constant (24 hour) power supply to function. This can be done with either a single meter which has a dual rate supply which allows you to set the charging periods on the heater to match your economy rates OR if you have a separate supply and meter for your economy you would require a secondary supply (24 hour) to the heater.
    Read our
    latest brochure

    Click Request for a printed brochure by post or Download to receive your digital copy right now.

    Download Request